Need help?Do you have a question about the Stratasys Dimension 768/Elite and is the answer not in the manual?
Details hazard classifications: Caution, Warning, and Danger, with their implications.
Provides an overview of the 186 board, its functions, and connections.
Describes the SBC, its network interface, hard drive, and control panel connections.
Details the PDB's function in providing various power levels to the system.
Diagrams and describes the major software components controlling the system.
Guides on diagnosing and narrowing down causes of system malfunctions.
Explains error codes displayed on the panel and printer shutdown procedures.
Lists major error codes displayed on the LCD and their definitions/recommendations.
Describes troubleshooting steps for errors not indicated by specific codes.
Details the components within the Gen 3 electronics bay and their procedures.
Details the components within the Gen 2 electronics bay and their procedures.
Procedure for adjusting the tip depth for foam substrates.
Procedure for adjusting XY tip offset values for system software.
General| Material | ABSplus |
|---|---|
| Print Technology | Fused Deposition Modeling (FDM) |
| Software | Catalyst EX |
| Weight | 70 kg |
| Build Size | 8 x 8 x 12 inches (203 x 203 x 305 mm) |
| Layer Thickness | 0.254 mm (0.010 in) |
| Layer Thickness (alternative) | 0.013 inches (0.330 mm) |
| Material Colors | Ivory, Black, Red, Blue |
| Accuracy | ±0.2 mm |
| Operating System Compatibility | Windows XP, Windows Vista, Windows 7 |
| Connectivity | Ethernet, USB |
| Power Requirements | 100-240 V, 50/60 Hz |
| System Size | 36 x 33 x 42 inches (914 x 838 x 1067 mm) |
| Nozzle Diameter | 0.010 inches (0.254 mm) |
To Next Page