Need help?Do you have a question about the Stratasys J750 and is the answer not in the manual?
Describes the safety features of Stratasys 3D printers like interlocks and UV screening.
Lists and explains warning symbols and labels found on or in J750 printers.
General guidelines for safe operation and maintenance of the J750 3D printing system.
Provides first-aid instructions for contact with uncured printing material.
Guidelines for proper disposal of printer waste, including materials and cartridges.
Precautions for handling hazardous resins before they are cured.
Guidance on converting CAD files to STL and VRML formats for printing.
Step-by-step instructions for installing the PolyJet Studio software.
Overview of the PolyJet Studio interface, including Studio and Manager screens.
Basic steps for preparing models, including placing objects on the build tray.
Steps to assign model materials to objects in PolyJet Studio.
How to use material combinations to achieve different shades and mechanical properties.
Using the Manager screen to monitor print jobs and their status.
Continuing a stopped or interrupted print job from a specific slice.
Initial steps to start the J750 3D printer, including power switch and software launch.
Instructions for loading and replacing Model and Support material cartridges.
Steps to resume printing after an interruption, using the Manager screen.
Using the Material Replacement wizard to flush and change printing materials.
Procedures for properly shutting down the printer using the Shutdown wizard.
Tasks and intervals for performing routine maintenance for optimum performance.
Verifying printer's ability to produce quality models by checking print head nozzles.
Procedures to follow if pattern test results indicate poor print quality.
Wizard-guided procedure for cleaning printer components to prevent nozzle clogging.
Checking and adjusting print head alignment monthly or after head replacement.
Running the Head Optimization wizard every 300 hours to calibrate print heads.
Tools and procedures for replacing defective print heads.
Testing and calibrating UV lamp radiation levels using the UV Calibration Wizard.
Step-by-step guide for replacing UV lamps in the printer.
Using the suite of tests to check hardware, software, and troubleshoot issues.
Methods for removing support material, including by hand, water pressure, and caustic soda.
General| Technology | PolyJet |
|---|---|
| Build Volume | 490 x 390 x 200 mm |
| Layer Thickness | 14 microns |
| Material Options | High Temperature |
| Material Compatibility | Vero family, Tango family |
| Number of Materials | Up to 6 simultaneously |
| Resolution | 600 x 600 dpi |
| Print Heads | 8 |
| Accuracy | Up to 20 - 85 µm for features below 50mm |
| Connectivity | Ethernet |
| Software | GrabCAD Print |
| Dimensions | 1400 x 1260 x 1100 mm |
To Next Page