Need help?Do you have a question about the Stratasys Fortus 250mc and is the answer not in the manual?
Guide to navigating the user manual and understanding its structure for optimal system use.
Information on obtaining additional resources like the electronic user guide and the official website.
Explains hazard symbols (Caution, Warning, Hot Surface, Gloves, Safety Glasses) used throughout the guide.
Procedures for unboxing the system and installing physical covers like forklift access covers.
Connecting the system to networks and power sources, including direct connections.
Installing system software and configuring network settings for communication.
The correct procedure for installing the modeling base onto the system's platen.
Overview of the display panel, system states, and Control Center application.
Steps for processing STL files, including resolution, fill, support, scale, and orientation.
Processes for initiating builds, managing materials, and building test parts.
Managing active builds, pausing, resuming, canceling jobs, and powering down the system.
Procedures for updating controller software and a list of startup kit tools.
Daily inspections, cleaning the purge container, and cleaning the fan filter.
Replacing key components like tips and shields, and performing necessary calibration.
Identifying common issues, understanding error codes, and exporting system configuration.
Procedures to resolve material extrusion problems, clogged tips, and material jams.
Information on how to contact customer support and what details to provide.
Information on recycling codes for system components and packaging.
Details on system dimensions, weight, installation location, and power requirements.
Operating conditions, air quality, altitude, and workstation compatibility.
Guidance on selecting, installing, and connecting a UPS for system protection.
Declarations of conformity, FCC, EMC, and disposal information.
General| Build Size | 254 x 254 x 305 mm (10 x 10 x 12 in) |
|---|---|
| Print Technology | Fused Deposition Modeling (FDM) |
| Software | Insight |
| Build Volume | 19.7 Liters |
| Layer Thickness | 0.330 mm (0.013 in) |
| Materials | ABS |
| Nozzle Diameter | 0.254 mm (0.010 in) |
| Connectivity | USB, Ethernet |
| Workstation Compatibility | Windows |
| Network Communication | Ethernet |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Accuracy | ± 0.127 mm (±0.005 in) |
To Next Page
