Need help?Do you have a question about the Stratasys Origin One and is the answer not in the manual?
Contact information for printer and software issues.
Basic safety tips for safe installation, operation, and maintenance.
Essential safety practices to ensure safe operation of the printer.
Guidance on required personal protective equipment for safe operation.
Explanation of hazard classification symbols used in the guide.
Overview of safety signs and their meanings on the printer.
Identifies the locations of safety labels on the printer.
Highlights specific printer components that pose safety hazards.
Specifies operating temperature and humidity for the printer.
Provides introductory information about the printer and its setup.
Congratulatory message and overview of the user manual.
Describes the Origin One as a manufacturing-grade 3D printer.
Lists items included in the printer's Welcome Kit.
Step-by-step guide for initial printer setup.
How to locate the printer's serial and model number.
Instructions for connecting the printer to an Ethernet network.
Procedure for safely connecting the printer to a power source.
Introduces the components of the Origin One printer.
Details the primary physical components of the printer.
Information about the printer's software and applications.
Describes the printer's embedded Linux operating system.
Cloud-based application for printer setup and job management.
Third-party software required for part preparation and slicing.
Introduction to the printer's touchscreen user interface.
How to select and prepare print jobs via the UI.
Accessing and configuring printer settings and utilities.
Detailed explanation of UI controls for system functions.
Interface for monitoring printer performance and data.
Explanation of the data displayed in the Analytics section.
How to view details of a specific print job.
Information on how the printer's status is shown on screen.
Description of the printer's status when not printing.
Description of the printer's status during an active print.
Steps for configuring the printer's network connection.
General introduction to network setup for the printer.
Guidance on required firewall settings for network connectivity.
Options for advanced network settings like static IP.
Core procedures for operating the printer daily.
Step-by-step guide to power on the Origin One printer.
Essential steps before starting a print job.
Procedure for correctly installing the build head.
Steps to calibrate the build head for accuracy.
How to fill and correctly seat the resin tray.
Guide to using the web-based application for printing.
Steps to upload 3D models to the Origin platform.
Process for selecting and sending print jobs to the printer.
How to configure material properties for printing.
Steps to follow after a print job is completed.
Instructions for safely removing parts from the build head.
How to separate printed parts from the build head.
Procedures for cleaning parts after printing.
Introduction to routine maintenance tasks for the printer.
Procedures for cleaning various printer components.
Steps for cleaning the printer's mid plate glass.
Guide for cleaning general printer parts.
Procedures related to the maintenance of the resin tray.
Instructions for replacing worn or dirty tray sheets.
Steps for replacing specific printer parts.
Detailed guide for replacing the resin ingress tube.
Information on contacting Stratasys support for assistance.
Troubleshooting guide for common printer issues.
Detailed table of symptoms and their solutions.
Steps to resolve a stuck build head issue.
Guidance on resolving problems with first layer adhesion.
How to fix issues where burn-in layers don't adhere.
Addresses problems causing unwanted layer lines on printed parts.
Guidance on resolving issues of part delamination.
Information regarding the printer's compliance with regulations.
Details on compliance and environmental standards.
Summary of the printer's adherence to FCC and EU directives.
Warning about potential radio interference in domestic environments.
Official FCC compliance statements for the device.
EMC compliance information for Canada.
Safety standards applicable in Canada.
Digital apparatus compliance statement for Canada.
Links to obtain material safety data sheets.
Guidance on proper disposal of electronic waste in the EU.
General| Build Volume | 192 x 108 x 370 mm (7.6 x 4.3 x 14.6 in) |
|---|---|
| Software | Stratasys Origin One Software |
| Technology | P3 (Programmable Photopolymerization) |
| Connectivity | Ethernet, USB |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Materials | Various photopolymers |
To Next Page