Stratasys Objet30 - User Manual

DOC-34025 Rev. I
3D Printing System
User Guide
Objet30

Summary

Safety

Safety Features

Describes built-in safety mechanisms of Stratasys 3D printers.

Symbols and Warning Labels

Safety Guidelines

General guidelines to ensure user safety during operation and maintenance.

First Aid for Working with Printing Materials

Waste Disposal

Installing Objet Studio

How to Install Objet Studio

Step-by-step guide for installing the Objet Studio software.

Using Objet Studio

Objet Studio Interface

Preparing Models for Production

Placing Objects on the Build Tray

Positioning Objects on the Build Tray

Manipulating Objects on the Tray

Valid Object Placement

Monitoring and Managing Print Jobs

How to track and control print jobs using the Job Manager.

Job Manager Screen

Detailed explanation of the Job Manager interface panels.

Operating and Maintaining the Printer

Starting the Printer

Procedure for powering on and initiating the printer.

Loading Model and Support Cartridges

Steps for installing and replacing printing material cartridges.

Producing Models

Printing Modes

Starting Printing

Steps to begin a print job on the online printer.

Resuming Production After Printing has Stopped

How to continue interrupted print jobs.

Changing the Printing Material

Detailed guide for replacing print materials using the wizard.

Shutting Down the Printer

Correct procedure for safely powering down the printer.

Material Flush;Fill Wizard

Routine Maintenance Schedule

Recommended maintenance tasks and their frequencies for optimal performance.

Cleaning the Print Heads and the Roller

Procedure for cleaning essential printer components for quality prints.

Pattern Test

Improving Print Quality

Aligning the Print Heads

Procedure for ensuring print heads are properly aligned.

Optimizing (Calibrating) Print Heads

Replacing Print Heads

Detailed instructions for replacing faulty print heads.

Testing and Calibrating the UV Lamp

Replacing the Material Filter

Replacing the Waste Container

Replacing the Pump Tubes

Handling Printed Models

Removing the Support Material

Stratasys Objet30 Specifications

General

Print Technology	PolyJet
Operating System	Windows
Resolution	600 x 600 dpi
Build Size	294 x 192 x 148.6 mm
Layer Thickness	16 microns
Materials	Vero, Tango
Connectivity	USB, Ethernet
Power Requirements	110-240 V, 50-60 Hz
Operating Temperature	18-25°C
Operating Humidity	30 to 70 %