Objet30 User Guide 3 Introducing the 3D Printer
DOC-34025 Rev. I 3-2
Basic Features
With Objet30 printers, you can achieve the following results when printing 3D
models:
• You can build high-end accurate prototypes, with a matte or glossy surface
finish.
• You can build realistic parts from a variety of materials, such as clear, high-
temperature, and simulated polypropylene.
Print jobs can be set up and sent to the printer with either of these applications:
• Objet Studio
• GrabCAD Print
These applications are described in the following chapters.
Objet Studio enables you to split models into component parts (“shells”) so you
can isolate, manipulate and print parts of a model. Then, you can assign model
materials and other characteristics to the shells. However, you have ultimate
control when separating models into shells by preparing stl files with your CAD
software.
GrabCAD Print supports many 3D CAD file formats, eliminating the need to
convert them to STL files. GrabCAD Print can also repair damaged files before
sending them to the printer.
Electrical Specifications
Printer power rating
The printer power rating is as follows:
❒ 100–120 VAC, 50–60 Hz, 7 A , 1 phase
❒ 200–240 VAC, 50–60 Hz, 3.5 A , 1 phase
Other electrical outlets should not be connected to the same line as the printer.
To Next Page
Loading...
