Stratasys Objet30 - Operating and Maintaining the Printer

DOC-34025 Rev. I 6-1
6
Operating and Maintaining the
Printer
Starting the Printer 6-3
Loading Model and Support Cartridges 6-5
Producing Models 6-7
Printing Modes 6-8
Preparing the Printer 6-9
Starting Printing 6-10
Printer Interface Color Key 6-12
Printing Indicators 6-14
Resuming Production After Printing has Stopped 6-15
Changing the Printing Material 6-18
Keeping the Printer in Idle Mode 6-24
Shutting Down the Printer 6-25
Material Flush/Fill Wizard 6-28
Maintaining the Printer 6-31
Routine Maintenance Schedule 6-31
Maintenance Counters 6-32
UV Lamp Check 6-34
Cleaning the Print Heads and the Roller 6-34
Cleaning and Replacing the Wiper 6-37
Pattern Test 6-40
Improving Print Quality 6-42
Cleaning and Replacing the Roller Waste Collector 6-43
Aligning the Print Heads 6-47
Optimizing (Calibrating) Print Heads 6-51
Replacing Print Heads 6-60
Testing and Calibrating the UV Lamp 6-71