Stratasys Objet30 - Producing Models

Objet30 User Guide 6 Operating and Maintaining the Printer
DOC-34025 Rev. I 6-7
Producing Models
Models can be printed after they are arranged on a virtual build tray in a 3D
printing application. Two such applications are available for preparing trays for
printing on the Objet30 printer:
• Objet Studio
• GrabCAD Print
For information about preparing model files for printing, see the relevant
documentation—
• "Using Objet Studio" chapter in this user guide or Help in the Objet Studio
application.
• GrabCAD Print online documentation.
The Objet30 printer is capable of printing models with the following maximum
dimensions:
➢ With glossy finish—
X-axis: 294.00 mm (11.57 inches)
Y-axis: 192.00 mm (7.55 inches)
Z-axis: 148.60 mm (5.85 inches)*
* OrthoDesk printers—100.0 mm (3.94 inches)
➢ With matte finish—
X-axis: 293.00 mm (11.53 inches)
Y-axis: 191.00 mm (7.52 inches)
Z-axis: 148.30 mm (5.83 inches)*
* OrthoDesk printers—97.9 mm (3.85 inches)