Objet30 User Guide 1 About This Guide
DOC-34025 Rev. I 1-3
Revision History
Translations of this guide are updated periodically. If you are consuming a translated
version, please check the English version for the latest revision and list of updates.
The following table lists the main changes in each revision of this document.
Revision Release Date Description
Rev. F January 2021
• Additional Resources was added.
• Workstation Requirements was updated.
• Replacing the UV Lamps was updated with
instructions for replacing the UV lamp bulb.
• Photobleaching for Transparent Models
was updated.
• Text, style and format improvements.
Rev. G January 2021 Replacing the UV Lamps the UV lamp bulb
replacement instructions were removed.
Rev. H February 2021 Printing Modes, printing modes for Objet30 Pro
and mode selection instructions in GrabCAD
Print were added.
Rev. I May 2021 The odor filter replacement task was removed
from the Preventive Maintenance Tasks list.
To Next Page
Loading...
