Objet30 User Guide 3 Introducing the 3D Printer
DOC-34025 Rev. I 3-6
mercury-vapor lights. Exposure to UV radiation causes an increase in viscosity
and, eventually, solidification.
Safety Considerations
Before being cured, resins are hazardous materials. To prevent possible
health hazards, follow these precautions regarding printing materials:
• Do not expose to flames, heat or sparks.
• Prevent contact with skin and eyes.
• Ventilate areas where they are handled.
• Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
You can find more safety information about resins in:
l "Safety Guidelines" on page 2-5
l "First Aid for Working with Printing Materials" on page 2-8
Disposal
Dispose of cartridges of model and support material in accordance with all
applicable laws and regulations.
Work Environment
Extreme heat and humidity conditions can adversely affect the operation of
your Objet30 3D printer. Use ventilation or air-conditioning systems, if
necessary, to keep the work area within the following ranges:
• 18°–25° C (64°–77° F)
• 30%–70% relative humidity
Workstation Requirements
Objet Studio Workstation
The requirements for client computers running Objet Studio are listed in the
Objet30 Site Preparation Guide. You can download this document from
stratasys.com.
GrabCAD Print Workstation
GrabCAD Print is an application for preparing and managing print jobs on
Stratasys Objet30 printers (and on other supported 3D printers).
• To download GrabCAD Print, go to: help.grabcad.com/print/sign-up.
• To see the requirements for client computers running GrabCAD Print, go to:
help.grabcad.com/print/system-requirements.
To Next Page
Loading...
