Objet30 User Guide 1 About This Guide
DOC-34025 Rev. I 1-2
Using This Guide
This user guide provides instructions for installing, operating and maintaining
Objet30 3D printing systems. It explains how to use features, and provides
practical examples to guide you as you use the system.
Important: Read the entire Safety chapter before using the system.
The text and figures in this guide are based on the Objet30 3D printer, software
version 33.2 and Objet Studio software version 9.2.
This guide assumes that—
• all the hardware, software, and network components of your system are
installed, configured, and operating correctly.
• the operator has a working knowledge of the Windows
®
PC platform.
For More Information
Visit the Stratasys Support Center to download the latest revision of this
document.This document is also available on the Support Center in other
languages.
If you have any questions or comments about the way information is presented
in this guide, or if you have any suggestions for future editions, please send a
message to c-support@stratasys.com.
To Next Page
Loading...
