Objet30 User Guide 5 Using Objet Studio
DOC-34025 Rev. I 5-66
Monitoring and Managing Print Jobs
In the Job Manager screen of Objet Studio, you monitor and manage jobs sent
to the printer. There are a few differences between Objet Studio on client
workstations and on the computer connected directly to the 3D printer—the
server workstation.
• Objet Studio installed on a client computer only displays the queue and
status for jobs sent to the 3D printer server from that computer, and it allows
the user to edit only these jobs.
Note: If there are several PolyJet printers on the local network, client
computers can connect to any of them, but only one at a time.
• Objet Studio installed on the computer directly connected to a specific 3D
printer (server), displays the queue and status for all jobs sent to that 3D
printer by the server and by all client computers on the network. It also
allows editing and manipulation of all jobs, and enables re-sending
previously-printed jobs to the printer.
If Objet Studio is not connected to a printer (or printer server), you can
prepare tray files for any PolyJet printer. Later, these files can be used by
Objet Studio on the appropriate printer server.
To Next Page
Loading...
