Need help?Do you have a question about the Stratasys Objet260 and is the answer not in the manual?
Provides instructions for installing, operating, and maintaining the Objet260 3D printing system.
Offers resources for downloading additional documents and contacting support for the Objet260 printer.
Defines key terms and concepts used throughout the Objet260 User Guide.
Details the safety features incorporated into the Objet260 3D printers for user protection.
Explains the meaning and location of warning symbols and labels found on the Objet260 printers.
Outlines essential general guidelines to ensure user safety during operation and maintenance.
Discusses precautions for handling chemical substances in Model and Support materials safely.
Provides essential first-aid instructions for contact with uncured printing materials.
Details proper procedures for disposing of printer waste, including materials and cartridges.
Introduces the advanced capabilities of Connex printing systems and their printing benefits.
Explains the setup options for the Objet260 3D printing system, including single-station and multi-station.
Describes supported file formats (STL, SLC, VRML) used for producing 3D models.
Details the types of printing materials used and essential storage and handling guidelines.
Guides users through the process of installing the Objet Studio software on their computers.
Explains how to start the Objet Studio application after installation.
Provides an overview of the main screens and elements within the Objet Studio software interface.
Outlines the fundamental steps involved in preparing 3D models for printing using Objet Studio.
Details the procedure for loading 3D model files onto the build tray within Objet Studio.
Explains how to select and assign model materials to objects before placing them on the build tray.
Covers automatic and manual methods for positioning objects optimally on the build tray for printing.
Describes tasks related to managing print jobs after model preparation, including validation and saving.
Explains the different printing modes available (HQ, HS, Digital Material) for the Objet260 printer.
Details how to monitor and manage print jobs using the Job Manager screen in Objet Studio.
Provides step-by-step instructions on how to power on and initiate the Objet260 3D printer.
Guides users on how to correctly load Model and Support material cartridges into the printer.
Explains the process of preparing the printer and initiating model production.
Details how to continue a print job that was interrupted or stopped.
Outlines the procedure for replacing installed printing materials using the Material Replacement wizard.
Lists essential routine maintenance tasks and their recommended frequencies for optimal printer performance.
Provides instructions for cleaning the print heads and roller to ensure print quality.
Guides users through the process of checking and adjusting print head alignment for accurate printing.
Explains how to calibrate print heads to achieve the best possible working configuration and print quality.
Describes the suite of diagnostic tests available for checking printer hardware and software.
Details the procedure for safely removing printed models from the build tray after cooling.
Explains various methods for removing support material from printed models.
Provides specific instructions for post-processing models made with VeroClear material.
Provides guidelines for proper storage of printed models to prevent deformation.
General| Build Size | 255 x 252 x 200 mm |
|---|---|
| Technology | PolyJet |
| Layer Thickness | 16 microns |
| Materials | Vero, Tango |
| Print Speed | Up to 20 mm / hour / layer |
| Connectivity | Ethernet, USB |
| Dimensions | 875 x 735 x 1200 mm |
To Next Page