Stratasys Objet260 - Replacing the Odor Filter

Objet260 User Guide 6 Operating and Maintaining the Objet260 3DPrinter
DOC-37004 Rev.E 6-69
Figure6-104Levelstabilization
5. Selectthecheckbox,andclickNext.
6. ClickDoneinthefinalwizardscreen.
Figure6-105Finalwizardscreen
Replacing the
Odor Filter
Iftheprinterexhaustisnotconnectedtoanexternalventilationsystem,a
built-inactivated-carbonfilterremovesodorsfromprintingmaterials.This
filtershouldbereplacedregularly(asnecessary)tokeepyourworking
environmentpleasant.