Stratasys Objet260 - Maintenance Counters

Objet260 User Guide 6 Operating and Maintaining the Objet260 3DPrinter
DOC-37004 Rev.E 6-24
Maintenance
Counters
Theprintercomputerapplicationrecordsthedatesandfrequencyforeach
maintenancetask.YoucandisplaytheMaintenanceCountersscreenfrom
theOptionsmenu.
Figure6-20SelectingMaintenanceCounters
Ifthereisamaintenancetaskdue,thisisindicatedonthemaininterface
screen.

Figure6-21MaintenanceRequiredindicator
Ifthisindicatorappears,youcandisplaytheMaintenanceCountersscreenby
clickingonit.
TheMaintenanceRequiredindicatorappearsbydefaultformost
operator-performedmaintenancetasks.Thecheckboxunder“User
Warning”controlswhetherornotitappearswhenaparticulartaskisdue.