Stratasys Objet260 - Professional Mode Features

Objet260 User Guide 5 Using Objet Studio
DOC-37004 Rev.E 5-75
Professional Mode Features
SomeadvancedfeaturesofObjetStudioareonlyaccessibleinProfessional
Mode.
ToseethecurrentObjetStudiosetting:
➢ OpentheToolsmenu.
Figure5-93Toolsmenu,showingProfessional Modeselected
IfProfessional Mode isselected,advancedfeaturesaredisplayed.
TochangetheProfessional Mode setting:
1. FromtheToolsmenu,selectProfessionalMode.
Thefollowingmessageisdisplayed,remindingyouthatthechangewill
onlytakeeffectthenext timeyouopenObjetStudio—eventhoughthe
checkmarknexttotheProfessional Mode optionappearsimmediately.
Figure5-94Configuration-changemessage
2. Closeandre-openObjetStudiotousetheProfessionalModefeatures.