Stratasys Objet260 - Printing Indicators

Objet260 User Guide 6 Operating and Maintaining the Objet260 3DPrinter
DOC-37004 Rev.E 6-9
Printing
Indicators
Theprinterinterfacescreenchangeswhenyousendaprintjobtotheprinter
(fromObjetStudio),iftheprinterison line:
•ThemodechangesfromPre-printtoPrinting.
•Thespecificactivitybeingperformedisshowninthe“currentactivity”
field.
•Currentjob-printinginformationisdisplayed.
•Theprintingprogressbarisdisplayed.
•TheStopandPausebuttonsareenabled.
Figure6-5Printerinterfaceduringprinting