Stratasys Objet260 - Setting User Preferences

Objet260 User Guide 5 Using Objet Studio
DOC-37004 Rev.E 5-74
Setting User
Preferences
YoucanchangeseveralObjetStudiosettingsthataffectobjectsplacedonthe
buildtray.
Tochangedefaultsettings:
➢ FromtheObjetStudioCommandsmenu ,selectUserPreferences.
Figure5-92Settingworkpreferences
•BuildingStyle—see"SurfaceFinish"onpage5-23.
•GridStyle—see"ChoosingtheSupportStrength"onpage5-63.
•ApplicationSettings:
❒ LockOrientation—see"FreezingModelOrientation"onpage5-45.
❒ Hollow—see"Hollow"—FillingModelswithSupportMaterialonpage
5-64.