Stratasys Objet260 - Safety Guidelines

Objet260 User Guide 2 Safety
DOC-37004 Rev.E 2-4
Safety Guidelines
Thefollowinggeneralguidelines,togetherwiththeinstructionsprovided
throughoutthisuserguide,ensureusersafetywhileoperatingand
maintainingthesystem.If the system is not operated as specified,
the user's safety may be compromised.
Printer
Installation
➢ Installationandremovaloftheprintershouldonlybedonebyqualified
servicepersonnel.
➢ Connecttheprinter(andtheUPSunit)totheelectricoutletusingapower
cordthatissafety-certified.
➢ Theelectricoutletshouldbeeasilyaccessible,neartheprinter.
➢ Neverconnectthepowerplugtoanoutletthatdoesnothaveaground
(earth)wire,andneverdisconnecttheground.Doingsomightexposethe
operatortoseriousdangerfromelectricshock.
➢ ThefollowingsafetystatementisfollowedbytranslationstoFinish,
Norwegian,SwedishandDanish,asrequiredbylocalregulations:
“Themachinemustbeconnectedtoagroundedpoweroutlet.”
❒ FI:Laiteonliitettäväsuojakoskettimillavarustettuunpistorasiaan.
❒ NO:Apparatetmåtilkoplesjordetstikkontakt.
❒ SE:Apparatenskallanslutastilljordatuttag.
❒ DK:Apparatetsstikpropskaltilsluttesenstikkontaktmedjord,som
giverforbindelsetilstikproppensjord.
➢ Leaveaminimumof15centimetersbetweenventilationopeningsand
wallsorotherobjects.
Printer
Operation
➢ TheprintershouldonlybeoperatedbypersonstrainedbyaStratasys
customer-supportrepresentative.
➢ Allpersonsoperatingormaintainingtheprintershouldknowthelocation
offirstaidandemergencyequipmentandhowtouseit.Never block
access to this equipment.
➢ Keepfingersandotherbodypartsclearoftheprintercoverwhenclosing
it.
➢ Neverattempttoopentheprintercoverwhileitisworking.
➢ Neveroverridetheinterlocksafetyswitch.
➢ Iftheinterlocksafetyswitcheverfails,do not use the printer.
➢ Severalpartsoftheprinterremainextremelyhotevenafterithasstopped
operating.AvoidtouchingtheUVlampsandtheprintblock.