Basic User Operations Material Settings
Page 39
© Copyright 2022 Stratasys. All rights reserved.
Material Settings
If material options are not available in the Materials tab, in App.Origin these can be requested.
The settings can be modified or new settings created. See Figure 18.
Figure 18: Material settings
For every layer, the build head moves through a cycle of three main stages: approach,
exposure, and separation. There are eight user defined settings that adjust either the duration,
distance, or speed of some part of the print process for three regions: First Layer, Burn In, and
Model.
• The First Layer settings apply specific settings to only the first layer to ensure build head
adhesion and accuracy.
• The Burn In region is a user defined number of layers after the first layer where specific
settings are applied to improve build head adhesion and accuracy.
To Next Page
Loading...
