Stratasys Origin One - Environmental Requirements; General; Physical; Environmental

Safety Instructions Environmental Requirements
Page 7
© Copyright 2022 Stratasys. All rights reserved.
Environmental Requirements
General
• Model: Origin One
• Process type: P3 (Programmable Photopolymerization)
• Materials: Photocurable materials from the Stratasys ecosystem materials partners
• Build Dimensions (W x D x H) (May be slightly reduced to increase dimensional accuracy)
• 192mm × 108mm × 370mm
• 7.56” × 4.25” × 14.57”
• Feature Resolution: Typically <50μm (material and design-dependent)
• Process Energy: UV (385nm) and Thermal
• Resin Tray Capacity: 15 - 65 fl oz (2 liters max)
• Supported File Types: STL and Zip of PNG images
Physical
• System Dimensions (W x D x H)
• Printer Crated 250 pounds (113.5 kg) Width: 30 inches (762 mm)
• Depth: 35 inches (889 mm)
• Height: 55 inches (1397 mm)
• Printer Uncrated 180 pounds (81.6 kg) Width: 19 inches (483 mm)
• Depth: 20 inches (508 mm)
• Height: 44 inches (1118 mm)
• Power Requirements: 90 - 264 VAC, 50 - 60 HZ, 700 W, 1 phase
• Connectivity: Ethernet
Environmental
The Origin One printer operating temperature shall be in the range of 59°F to 86°F (13°C to
30°C), with relative humidity range of 30% to 70% non-condensing.