Basic User Operations Material Settings
Page 40
© Copyright 2022 Stratasys. All rights reserved.
• The Model region consists of all consecutive layers beyond the Burn In region where
specific settings are applied to improve print speed.
Figure 19: Material settings theory
• Exposure Delay: After the build head has completed its approach, the printer waits this
duration before turning on the projector
• Exposure Duration: The amount of time the projector turns on and projects each layer.
• Separation Distance: After Exposing, the build head moves upward this amount to
separate the part from the tray window.
• Advancement Delay: After the build head has completed its separation, it waits this
amount of time at the top of travel before advancing.
• Start Distance: After exposure delay and duration, the build head raises this distance in
millimeters before continuing to the full separation distance.
• Start Speed: The speed at which the build head moves upward during the start distance
region of separation.
• End Distance: After reaching the separation distance and waiting the advancement delay,
the build head slows down this distance from the tray window in millimeters.
• End Speed: The speed at which the build head moves downward during the end distance
region of approach.
To Next Page
Loading...
