Need help?Do you have a question about the Stratasys Mojo and is the answer not in the manual?
Guidance on using the user guide and resources for further information.
Essential precautions to ensure proper printer use and prevent damage.
Preparing the physical site and connecting the printer to power.
Instructions for installing Mojo 3D printer and Print Wizard software.
Explanation of LED display and status icons for printer status.
Overview of software and procedure for installing the modeling base.
How to select the printer, add new printers, and configure job settings like scale and copies.
Setting support style, part interior, display units, and part orientation.
Options to clear errors, export printer files, and manage settings.
Verifying extrusion and purging material from the filament tube.
Steps to remove the modeling base from the printer chamber.
Comprehensive guide to removing, storing, and installing QuickPack Print Engines.
Procedure for installing tip wipes into the bracket.
Daily and as-needed maintenance tasks for the printer.
Procedure for replacing the tip wipe assembly with a new one.
Basic steps like cycling power and resuming prints to resolve issues.
Specific solutions for issues like no power, extrusion, and communication errors.
Recommendations for no power, material not extruding, or under extruding.
Solutions for communication errors, filament sensor issues, and LED display errors.
List of fault codes and recommended actions for printer errors.
Actions to take for error codes that prevent building.
Information on registering the printer and contacting customer support.
Information on recycling modeling bases and packaging materials.
Dimensions, weight, installation location, power, and air circulation needs.
Host computer requirements and electrical power specifications.
Operating temperature, humidity, air quality, and sound pressure levels.
Declaration of Conformity, EMC Class A warning, and FCC statements.
EMC norms for Canada, DOC statement, and MSDS access.
Guidelines for disposing of electronic waste in the European Union.
Definitions of important terms used throughout the manual.
General| Printing Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Material | ABSplus |
| Build Size | 5 x 5 x 5 in (127 x 127 x 127 mm) |
| Material Support | Soluble support material |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows |
| Dimensions | 25 x 21 x 20 in (64 x 53 x 51 cm) |
To Next Page