23
For example: a cube that is defined as 5.1 cm (2 in.) X 5.1 cm (2 in.) X 5.1 cm (2 in.) can be built to be 10.2 cm
(4 in.) X 10.2 cm (4 in.) X 10.2 cm (4 in.) by simply changing the scale to 2. If after changing the scale to 2, you
decide that a size of 7.6 cm (3 in.) X 7.6 cm (3 in.) X 7.6 cm (3 in.) would be preferred, change the scale to 1.5 -
the scale relates to the original size of 2 inches, NOT the resulting 4 inches from the first scale change.
SELECTING THE NUMBER OF COPIES
Users may choose the number of copies (parts) to be printed. The printer will automatically calculate the number
of parts that can be printed on the modeling base. As the number of copies are increased, the printer may add
another job.
Figure 4-25: Number of copies
To Next Page
Loading...
