Stratasys Mojo - 9 PRINTER SPECIFICATIONS; Physical and Facility Requirements; Workstation and Power Details

54
9 PRINTER SPECIFICATIONS
PHYSICAL SPECIFICATIONS
FACILITY SPECIFICATIONS
WORKSTATION SPECIFICATIONS
For details, see the Print Wizard and Control Panel Workstation Requirements document available from the
Stratasys website.
POWER SPECIFICATIONS
Height 47 cm (18.5 in.)
Width 63 cm (25 in.)
Depth 52.1 cm (20.5 in.)
Weight 28.2 kg (62 lbs)
Installation location Stable flat surface capable of holding 34.1 kg (75 lbs), with a height clearance of
80 cm (31.5 in.).
Power Requirements 6A @ 100-127VAC or 2.5A 220-240VAC -- 50/60Hz 600W dedicated circuit within
2 m (80 in.)
Do not use an extension cord or a power strip. Using these can possibly cause
intermittent power issues.
Air Circulation 165.1 mm (6.5 in.) minimum space behind printer for air circulation.
50.8 mm (2 in.) minimum space around printer for air circulation.
Source (nominal) 6A 100-127VAC or 2.5A @ 220-240VAC -- 50/60Hz 600W dedicated circuit within
2 m (80 in.)
Do not use an extension cord or a power strip. Using these can possibly cause
intermittent power issues.