EasyManua.ls Logo

Straumann CARES Scan CS2 - Page 20

Straumann CARES Scan CS2
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Keyboard
p Keyboards should be cleaned with the computer switched off or
disconnected from the computer.
p Dust and other dirt particles between the key gaps can be removed
with a soft and dry long-fiber brush. The use of compressed air is preferred.
A hair dryer which can blow cold air may also be used.
p The keys should then be freed from dirt and grease traces with a slightly
moistened cloth. No moisture should penetrate the keyboard, as this could
damage the built-in electronics or lead to errors in data transmission to
the PC at a later stage. In case of doubt let the keyboard dry or dry it with
warm (not hot) air.
Dust in the interior of the computer
If you suspect dust in the scanner, PC housing, plastic housing, or the LCD monitor
do not open. Contact Straumann technical support. Opening the housing of
any hardware will void the warranty.
Caution
Do not open the housing while the computer is connected to the power supply.
Otherwise, there is a risk of electric shock.