EasyManua.ls Logo

Straumann CARES Scan CS2 - 4 Warnings: Precautionary Measures

Straumann CARES Scan CS2
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
4. WARNINGS: PRECAUTIONARY MEASURES
If the unit develops smoke, smells burnt or produces unusual noises, im-
mediately pull out the main power cable and ask your local Straumann
representative or technical support for advice.
Attempting to work with a faulty device can be dangerous.
Keep small objects and liquids away from the unit.
Small objects may inadvertently drop through the ventilation slots of the
unit`s housing and thereby cause fire, electric shock or damage of the unit.
Should an object or liquid get into the housing, immediately pull out the
main power cable of the unit. Have the unit checked by a qualified Straumann
technician before you work with it again.
Place the unit on a suitable and stable surface.
Otherwise, the unit could be damaged and there is a risk of fire and electric
shock.
p Do not use the unit outdoors.
p Do not use the unit in a moving vehicle (ship, aircraft, train, car, etc.).
p Do not install it in dusty or damp environment.
p Do not place it in the vicinity of a heat-generating device or an air humidifier
(recommended temp range 1535 °C, 59 95 °F, humidity 5 60 %).
p After unpacking and before making any electrical connections, allow the
unit to acclimate to ambient temperature and humidity for 2 hours.
Use the enclosed main power cable for connection to the national standard
line voltage. Make sure that the nominal voltage of the main power cable
is not exceeded.
Otherwise, there is a risk of fire and electric shock.
The unit must be connected to a correctly grounded wall outlet.
Otherwise, there is a risk of fire and electric shock.
Connect the main power cable to an easily accessible wall outlet.
Make sure that you can quickly pull out the main power cable in case of an
emergency.
Caution
p Do not block the ventilation slots of the housing (on the back of the scanner).
p Do not place any books, papers or other objects on any ventilation slots.
p Do not install the unit in a constricted space without ventilation. Blocking
the ventilation slots so that air can no longer circulate may cause fire or
other damage.