Remedying Faults in PP 1207–Klöckner Möller
Remedying faults PP 1207
page 30 –April 2005
A. Open door wide enough; door limit switch (S4.5 ABB) (S12 KLM)must be
released. Check the switch tappet for smooth axial movability. Check if switch has
been jammed. ABB circuit: Slots 10 & 11 must have continuity when door is open.
C. Check limit switch.
4.1 Bale cannot be ejected
1. Door not open wide enough
C. Door limit switch faulty
PDF wurde mit pdfFactory-Prüfversion erstellt. www.context-gmbh.de
To Next Page
Loading...
