Lisa Compact 74
16.3 Fading
The audio will fade out in all cases where audio playback is interrupted or stopped. This includes
switching between playlists and stream presets and the start of announcements, but also when powering
the device off and executing tasks which require the device to power off or reboot.
Fade in is applied when the device returns from fallback, switching back to the stream and starting to
play the stream audio.
16.4 Setting the volume
To set the volume, use one of the methods to send a command to the Lisa (see the section on
Commands).
16.5 Setting bass
To set the bass, use one of the methods to send a command to the Lisa (see the section on
Commands).
16.6 Setting treble
To set the treble, use one of the methods to send a command to the Lisa (see the section on
Commands).
16.7 Downmix audio to mono
Some audio installations only accept mono input. To avoid a stereo-to-mono converter (an additional
component), the Lisa can be configured to downmix the audio. The Lisa will mix the audio data of the left
and right channel together and send the (down-sampled) result to both RCA output connectors.
The Lisa can be configured to downmix by sending a command (see Command overview list).
To Next Page
Loading...