6 BA_141-30-40_A6-7_140416_en
2
2.1
General
Any person involved in the installation, operation, maintenance and repair of
the machine must have read and understood the operating instructions and
mainly the safety instructions before starting the machine. Please open the
illustrations at the beginning of these operating instructions, so you can follow
the illustrations step by step while reading the instructions.
Operating instructions
2.2
The operating side of the machine is the basis for descriptions referring to
sides. The class identification (type) as well as serial and model number (after
the dash) are located below the left handwheel. These data are also shown on
the front page of the operation instructions.
Class identification, serial number and orientation of the
machine
2.3
Class 141-30
Range of application and intended use
Single Thread Overseaming Machine for sewing fur facings, heavy furs such as
lambskin, imitated furs and polishing wheels.
Class 141-40
High Speed Single Thread Overseaming Machine for fine fur stranding (let-out)
and general sewing operations.
To Next Page
Loading...
