Strobel 310D-R - Default Chapter; Table of Contents

1 MA_310D-R_3100D-R_A16-3_181015_en
Mechanic’s Instructions
STROBEL Classes 310D-R and 3100D-R
Contents
1 General notes on safety ............................................................................................ 5
2 General ..................................................................................................................... 7
2.1 Operating instructions ..................................................................................... 7
2.2 Class description, machine number and reference position left/right ............. 7
2.3 Machine applications ...................................................................................... 7
2.4 Technical data ................................................................................................ 8
2.5 Adjusting instructions in brief .......................................................................... 9
3 Notes on repair and adjustment .............................................................................. 10
3.1 Stitch plate fitting .......................................................................................... 10
3.1.1 Removing the stitch plate (Fig. 1) .................................................... 10
3.1.2 Fitting the stitch plate ....................................................................... 11
3.1.3 Adjusting the stitch plate .................................................................. 11
3.1.4 Adjusting the needle (Fig. 2) ............................................................ 11
3.1.5 Exchanging the needle slide plate (Fig. 1) ....................................... 12
3.2 Adjusting the needle lever ............................................................................ 13
3.2.1 Adjusting the needle lever path (Fig. 2) ........................................... 13
3.2.2 Side adjustment of the needle lever (Fig. 2) .................................... 13
3.3 Loop stroke ................................................................................................... 14
3.3.1 Setting the loop stroke (Fig. 3) ......................................................... 14
3.4 Hook ............................................................................................................. 15
3.4.1 Removal and fitting of the hook (Fig. 2 and Fig. 3) .......................... 15
3.4.2 Adjusting the hook to the needle (Fig. 4) ......................................... 15
3.4.3 Removal and fitting of the reel capsule (Fig. 5) ................................ 16
3.4.4 Thread tension – reel thread (Fig. 6) ................................................ 16
3.4.5 Setting the reel capsule venting (Fig. 2) ........................................... 17
3.5 Side presser ................................................................................................. 17
3.5.1 Adjusting the side presser (Fig. 2) ................................................... 17
3.6 Side plunger ................................................................................................. 18
3.6.1 Adjusting the side plunger (Fig. 2) ................................................... 18
3.6.2 Cams (Fig. 2 and Fig. 3) .................................................................. 18
3.6.3 Adjusting the thread tension venting ................................................ 18
118.05.07
118.05.05
118.05.06
121.00.02