6 BA_VEB100-2-4-5_A5-3_230118_en.doc
2.4 Power supply
2.4.1 General notes
C A U T I O N !
Work on the sewing machine's electrical equipment or sewing
drive may only be done by electricians!
There is the D A N G E R of a fatal electrical shock.
When working on the electrical equipment, the machine with the
S1 power switch has to be switched off and the power plug
pulled out!
The operating instructions (including safety instructions) of the
sewing machine and sewing drive must be observed!
2.5 Function sequence, machine class and operating concept
2.5.1 General function sequence
The DAC Classic control contains the suitable function sequence for almost all VEB
machine classes.
The exact function sequence for a machine class is determined at the control by the
function sequence (basic function sequence and machine selection), the function
parameters and the switchable functions. The control is optimally control-technically
adapted to the respective machine class by correct settings.
On delivery, all function parameters and functions are already set correctly.
To Next Page
Loading...
Need help?
General
