Strong LEAP-S3 PRO - Bluetooth Pairing; Remove a Bluetooth Device; System; About

13
Bluetooth Pairing
Select Settings in the Menu Launcher, click Remote & Accessories, then select the device to be paired. Make sure that the device
you want to pair with is in pairing mode. In this menu you can setup some remote buttons to control Volume, Power, Input
sources on TV or Digital Home ampliers.
Remove a Bluetooth Device
Select Settings from the Menu Launcher.
From the Remote & Accessories menu, select the Bluetooth device you want to remove.
Click “Forget” to remove this device.
System
Select system to nd information of software and android version, to check for system update and if you like to do full factory
reset to remove all installed apps and accounts. As well to select menu language, date and time location and settings of power
and energy modes.
About
You can check information about your device by clicking on ABOUT in the System Menu. This menu will show you the model of
your device, version, rmware version and more. You can also update your system by clicking on System update from this menu.
Your system is up to date
Last successful check for update at 1:00 PM
Check for update
Factory Reset
Under Settings, System > About > Reset
Click Factory data reset to erase everything back to factory settings.
Once this option has been selected, all manually installed apps and user data information will be deleted including your Google
accounts from LEAP-S3 PRO box.
Alternative: On the left panel of the LEAP-S3 PRO box, between the USB ports, there is a small hole containing the RESET button.
Press this button for 10 seconds while on the home screen to reset the device back to factory settings.
Factory data Reset
Cancel
Erase everything
Date and Time
Under Settings > System > select Date and Time to change Time zone and to use 24-hour format.
Language
Under Settings > System > select Language to change the language previously set.
Keyboard
Under Settings > System > to select or change Keyboard type and the belonging language type.
Storage
Under Settings > System > to check used and available memory.