Strong LEAP-S3 PRO - Simple Troubleshooting; Technical Specifications

15
Ask Google
Sports: How did the Patriots do? When is the next Warriors game? Calculations: What’s 20% of 80? Dictionary: What does “ludic”
mean?
Find answers: How far away is the moon? How do you remove stains in a rug? Unit conversions: How many teaspoons in a cup?
Speak into the microphone of your Voice Search remote.
Learn more about the Google Assistant on assistant.google.com or say, “What can you do?” Just ask questions like:” How is the
weather in Paris?”.
To get started, press the Google Assistant button on your remote.
NOTE: To be able to use Google Assistant on your remote, must remote be paired to your LEAP-S3 PRO box.
9. SIMPLE TROUBLESHOOTING
Issue Possible Reason Solution
No LED after power on The power adapter is not
properly connected.
Make Sure the device is connected to the power.
No Sound • The Tv is on Mute or volume
is low.
• The device is on Mute or the
volume is too low.
Press the mute button to restore the sound and increase
the volume.
Failed to connect to
network
Wi-Fi is turned o or the signal
is too weak.
Restart the Wi-Fi or adjust the position of the device
closer to the router.
Remote Control Failure • Remote control batteries are
low in power.
• Lost pairing
Replace batteries.
Switch main power OFF/ON and pair remote with BACK
& HOME button press 5 seconds. Wait until pair screen
appears, pair.
No Picture on Screen Wrong TV HDMI input. Make sure that correct HDMI is selected as your TV input.
Check if you not are using old HDMI cable.
Voice search on remote is
not working
Remote is not paired to the
Google TV Box
See the Pairing Bluetooth Device section in this guide
No Audio Audio Settings not congured
correctly for your TV
Settings> Display & Sound > Advanced sound settings
10. TECHNICAL SPECIFICATIONS
Video decoder
Video resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p24, 1080p30, 1080p60 4Kx2Kp30, 4Kx2Kp60, HEVC H.265,
MPEG-4,MP@ML, MP@HL proles, AV1, VC-1/VP8/VP9, HDR10+, HDR10, HLG, Dolby Vision
Audio decoder
Audio decoding: 32KHz to 192KHz sample rates, MPEG Audio Layers 1, 2 and 3, MS12, Dolby Digital Plus*, Dolby Atmos*
* Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
System & Memory
Android Version: 12
CPU: Amlogic RTD1325 Quad A55 20400 DMIPS 32K I/D cache 512KB L2 cache
GPU: ARM G57 OpenGL ES 3.2 Graphics engine
SDRAM: 4GB DDR4
Flash: eMMC: 32 GB