Name: Strong SRT 2022
Brand: Strong
Rating: 5 (1 reviews)

To Next Page

To Previous Page

NOTE: The function of Standby on the remote control is limited or not possible if

there are obstacles in front of the remote control sensor on the front panel

of the IP Box. If only the Standby button is working and there is no reaction

when pressing any other button it could be that the batteries are empty

or the USB adapter was removed or, as mentioned above, you need to pair

the USB adapter to the remote control manually.

3.0 CONNECTIONS

3.1 Basic connection

Fig. 7

a. Connect one end of a good quality HDMI cable to the HDMI output on your IP Box and the

other end to the HDMI input of your TV.

b. Connect the LAN cable from your router/Internet connection into the RJ45 LAN input.

c. Plug in the power plug from the 5 V adapter and insert the adapter into a suitable wall outlet.

3.2 Connecting to the Internet

Fig. 7

a. For the best performance we advise using a wired connection to your router.

b. Alternatively, you can use the in-built wireless adapter to connect to the Internet via your

wireless router.

Note: Be aware that the Internet speed will be reduced by walls or long distance

between the IP Box and the router when using wireless connection. This

will lead to lower quality of video streams from the Internet.

3.3 Connecting to a Digital Audio Amplier

Fig. 7

Use the HDMI output to connect your IP Box to the HDMI input of your Hi-Fi system or audio amplier

and connect the HDMI output from your Hi-Fi system to the HDMI input of your TV. In the Android

sounds menu, you can select the Digital sounds option to activate Dolby digital audio by selecting

HDMI or select PCM for downmix to stereo audio.

3.4 Connection of a wireless mouse or key board*

Fig. 8

For optimal usage of the Android part we recommend using also a mouse or wireless mouse for

maximum freedom, besides the remote control. This enables tracking and dropping of functions, just

as you can do on mobile phones.

Switch the main power O and insert a mouse or wireless mouse dongle into one of the free USB

slots. Switch the main power back On. The device will be automatically recognised and you can start

using it.

Questions and Answers:

Need help?

Do you have a question about the Strong SRT 2022 and is the answer not in the manual?

Strong SRT 2022 Specifications

General