Name: Strong SRT 2022
Brand: Strong
Rating: 5 (1 reviews)

To Next Page

To Previous Page

6.2 Add accessory (Bluetooth)

This menu allows you to open the Bluetooth search detection ON or OFF, to setup new connections

to other Bluetooth devices.

If you like to make connection you need to open on both devices this function. With a conrmation

by numeric key you make a secured connection.

6.3 Display

Here you can set your Screen resolution, Screen position and Daydream.

6.3.1 Screen resolution

In this menu you can select your preferred HDMI output resolution which is supported by the

connected TV. The AUTO mode automatically selects the best output resolution of the combination

(so called 'handshake').

6.3.2 Screen position

Select Screen position if the size of the displayed screen is a bit too large or too small for the

connected screen.

6.3.3 Daydream

You can set your Daydream screen in None or Colours.

Choose the period of inactivity to start Daydream: (5, 10, 15, 30, 60 minutes, Never).

When to sleep: Screen turns OFF after this period of inactivity: (30minutes, 1, 3, 6, 12 hours, Never).

6.4 Sounds

In this menu you can setup the correct audio output setting if you like to use Dolby audio to connect

to a digital amplier.

System sounds: Select On to hear every time a click of remote buttons as conrmation. Select

O for no click sound.

Digital sounds: The selection HDMI sends Dolby audio. The selection PCM gives only Stereo

to all outputs.

6.5 Language

Select the OSD language which shall be used for the menus on screen.

6.6 Storage & Reset

This menu gives you an overview of your storage device.

You can also do a Factory data reset.

6.6.1 Storage

Here you get an overview from the used space on your storage device.

You can also clear your cached data for all apps in Cached data.

Questions and Answers:

Need help?

Do you have a question about the Strong SRT 2022 and is the answer not in the manual?

Strong SRT 2022 Specifications

General