To Next PageTo Next PageHow to fix Unorderly ripples on the picture of Strong LED TV?
If you see disorderly ripples on the picture of your Strong LED TV, it's usually due to local interference from sources like cars, daylight lamps, and hair dryers. Adjust the antenna to minimize the interference.
How to fix snowy dots, blocking and interference on Strong SRT 32HC4043 LED TV?
If you're experiencing snowy dots, blocking, or interference on your Strong LED TV, it could be due to: * The antenna being located in a fringe area with a weak signal. Try adjusting the position and orientation of the antenna. * A loose antenna connection. Check the connection of the antenna. * The channel needing fine-tuning. Fine tune the channel. * Broadcasting failure may also cause this problem. Try another channel.
What causes weak signal and intermittent reception on Strong LED TV?
If your Strong LED TV is experiencing no signal or a weak, intermittent signal, it could be due to several reasons: * Loose cables or moisture in the cables/connectors. Check the cable connections, LNB, and other equipment. Alternatively, heavy rain or storms could be the cause; wait for the weather to improve. * The satellite dish may not be pointing at the correct satellite. * The satellite dish might be too small, or there could be obstructions like trees or buildings in the path. * The signal could be too strong if the dish is oversized.
Why is there normal picture but no sound on my Strong LED TV?
If your Strong LED TV shows a normal picture but has no sound, first, try pressing the volume up button. If that doesn't work, check if the volume is muted and press the appropriate button to restore the sound. You can also try changing the sound system. A broadcasting failure might also be the cause.
How to troubleshoot no picture and no sound on Strong LED TV?
If your Strong LED TV has no picture and no sound, check if the fuse or circuit breaker is working. Ensure that the outlet is functioning by plugging in another electrical device. Also, verify that the power plug is making good contact with the outlet and check the signal source.
What to do if Strong LED TV has snowy dots, blocking and interference?
If you are experiencing snowy dots, blocking, and interference on your Strong LED TV, adjust the position and orientation of the indoor/outdoor antenna, especially if it's located in a fringe area with a weak signal. Check the antenna connection and fine-tune the channel. You might also try another channel, as a broadcasting failure could be the cause.
What to do if my Strong SRT 32HC4043 has no picture but normal sound?
If your Strong LED TV displays no picture but the sound is normal, attempt the following: * Adjust the brightness and contrast settings. * Be aware that a broadcasting failure may be the cause.
How to stop radio frequency interference on Strong LED TV?
To resolve radio frequency interference with your Strong LED TV, find out and remove the source of the radio interference.
What causes no signal or weak signal on Strong LED TV?
If you are experiencing no signal, a weak signal, or intermittent reception on your Strong LED TV, check the cable connections, LNB, and other equipment between the LNB and the receiver. You can also peak or adjust the dish. If the satellite dish is not pointing at the correct satellite, adjust it. If the satellite dish is too small or there are obstructions, change to a larger dish or change its position. If the signal is too strong, connect a signal attenuator to the LNB input.
How to fix no color on Strong LED TV?
If your Strong LED TV is showing no color, try changing the color system and adjusting the saturation. You can also try another channel because a black-and-white program may be received.
Audio| audio output | 2 x 5 W |
|---|
Video| channel coverage DVB-T2 | 174 MHz-230 MHz; 470 MHz-860 MHz |
|---|---|
| channel coverage DVB-C | 50-858 MHz |
| channel coverage DVB-S2 | 950 MHz-2150 MHz |
Connectors| ANT/CABLE IN | 1x |
|---|---|
| SAT IN | 1x |
| CI | 1x |
| HDMI | 2x |
| S/PDIF (OPTICAL) | 1x |
| AV IN | 1x |
| USB | 1x |
| EARPHONE | 1x |
Power| operating voltage | 180 ~ 240 V AC 50/60 Hz |
|---|---|
| power consumption max | 50 W |
| power consumption typ | 31 W |
| power consumption in standby | <0.5 W |
Operating Environment| operating temperature | +5 °C ~ +35 °C |
|---|---|
| storage temperature | -15 °C ~ +45 °C |
| operating humidity | 20% ~ 80% RH, non-condensing |
| storage humidity | 10% ~ 90% RH, non-condensing |
Weight and Dimensions| dimensions (WxHxD) | 732.1 x 180.6 x 483.6 mm |
|---|---|
| net-weight | 4.3 kg |
