To Next PageTo Next PageWhat to do if there is no picture but normal sound on Strong LED TV?
If your Strong LED TV displays no picture but has normal sound, try adjusting the brightness and contrast settings. A broadcasting failure may also be the reason.
Why does the remote control not work on my Strong LED TV?
If your Strong LED TV remote control isn't working, start by changing the batteries. Also, ensure the batteries are installed correctly and that the main power is connected.
What to do if Strong LED TV has snowy dots, blocking and interference?
If you are experiencing snowy dots, blocking, and interference on your Strong LED TV, adjust the position and orientation of the indoor/outdoor antenna, especially if it's located in a fringe area with a weak signal. Check the antenna connection and fine-tune the channel. You might also try another channel, as a broadcasting failure could be the cause.
How to troubleshoot no picture and no sound on Strong LED TV?
If your Strong LED TV has no picture and no sound, check if the fuse or circuit breaker is working. Ensure that the outlet is functioning by plugging in another electrical device. Also, verify that the power plug is making good contact with the outlet and check the signal source.
Why is there normal picture but no sound on my Strong LED TV?
If your Strong LED TV shows a normal picture but has no sound, first, try pressing the volume up button. If that doesn't work, check if the volume is muted and press the appropriate button to restore the sound. You can also try changing the sound system. A broadcasting failure might also be the cause.
What causes weak signal and intermittent reception on Strong LED TV?
If your Strong LED TV is experiencing no signal or a weak, intermittent signal, it could be due to several reasons: * Loose cables or moisture in the cables/connectors. Check the cable connections, LNB, and other equipment. Alternatively, heavy rain or storms could be the cause; wait for the weather to improve. * The satellite dish may not be pointing at the correct satellite. * The satellite dish might be too small, or there could be obstructions like trees or buildings in the path. * The signal could be too strong if the dish is oversized.
How to fix snowy dots, blocking and interference on Strong SRT 32HC4043 LED TV?
If you're experiencing snowy dots, blocking, or interference on your Strong LED TV, it could be due to: * The antenna being located in a fringe area with a weak signal. Try adjusting the position and orientation of the antenna. * A loose antenna connection. Check the connection of the antenna. * The channel needing fine-tuning. Fine tune the channel. * Broadcasting failure may also cause this problem. Try another channel.
Audio| audio output | 2 x 5 W |
|---|
Video| channel coverage DVB-T2 | 174 MHz-230 MHz; 470 MHz-860 MHz |
|---|---|
| channel coverage DVB-C | 50-858 MHz |
| channel coverage DVB-S2 | 950 MHz-2150 MHz |
Connectors| ANT/CABLE IN | 1x |
|---|---|
| SAT IN | 1x |
| CI | 1x |
| HDMI | 2x |
| S/PDIF (OPTICAL) | 1x |
| AV IN | 1x |
| USB | 1x |
| EARPHONE | 1x |
Power| operating voltage | 180 ~ 240 V AC 50/60 Hz |
|---|---|
| power consumption max | 50 W |
| power consumption typ | 31 W |
| power consumption in standby | <0.5 W |
Operating Environment| operating temperature | +5 °C ~ +35 °C |
|---|---|
| storage temperature | -15 °C ~ +45 °C |
| operating humidity | 20% ~ 80% RH, non-condensing |
| storage humidity | 10% ~ 90% RH, non-condensing |
Weight and Dimensions| dimensions (WxHxD) | 732.1 x 180.6 x 483.6 mm |
|---|---|
| net-weight | 4.3 kg |
