EasyManua.ls Logo

Strong SRT 5406 - Remote Control Setup; Installing Remote Batteries

Strong SRT 5406
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
16. EXIT: To close the current menu and return
to normal viewing
17. PAGE
/ :
To move to the next or previous
page ( if there is more than one page)
18. PAUSE: To freeze the screen
19. ASPECT: To cycle through the aspect ratios:
16:9 and 4:3
20 .PAGE
/ :
To move to the next or previous
page ( if there is more than one page)
21. TXT: To show Teletext
22. USB: To lay music from a USB memory stick,
or to upgrade the software
Installing the batteries in the remote control
1. Press down on the retaining catch on the lid of the battery recess on the remote control and
remove the lid.
2. Insert two AAA batteries into the recess.
Be careful to insert the batteries as shown in the diagram inside the recess.
3. Replace the lid over the recess and gently push down on the lid until it snaps firmly into place.

Related product manuals