Structural Concepts G Series - Cleaning Schedule, ContD: Case Interior - Daily

15
Caution! TURN MAIN POWER SWITCH TO “OFF
”
and allow case to cool at least 45 minutes
before cleaning case interior!
Cleaning Daily Task
Case
Interior
X
Glass
x Clean inside surfaces of glass with a household or commercial glass cleaner.
x Wipe dry with clean cloth or paper towel.
X
Polycarbonate Heat Shields (At Each Shelf)
x Use a liquid detergent and clean with a clean cloth.
x Caution! Do not use glass cleaner on polycarbonate heat shields. Such
cleaning solution will cause heat shield to become cloudy and crackled.
X
Shelves / Deck / Wire Racks
x Spills (Unhardened): Clean immediately to prevent hardening or “baking” of
spills. Remove wire rack (if any) to access area. Use a dry cloth, folded over
several times to clean up spills; this will prevent being burned due to steam
from wet cloth on the hot surfaces.
x Spills (Hardened): Clean hardened spills with a damp cloth dipped in
household cleaner. For stubborn stains, use firm-
bristled nylon brush or
scouring pad dipped in warm, soapy water. Use spray bottle with water and
clean paper towel to wipe up residue. Wire racks may be removed, submersed
in warm to hot soapy water, and cleaned with soft-bristled brush.
CLEANING SCHEDULE, CONT’D: CASE INTERIOR - DAILY