EasyManua.ls Logo

Structural Concepts G Series - Installation, ContD: Important! Heated Shelf Label Placement

Structural Concepts G Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
INSTALLATION, CONTD: IMPORTANT! HEATED SHELF LABEL PLACEMENT
Important! Check
That Danger-Hot
Labels Are Placed
On Heated Shelves
As Shown.
5. Important! Check That Danger-HotLabels Are Properly Attached To Case.
x Shelves can get extremely hot and cause severe burns.
x Illustration below shows proper placement of Danger-Hotlabels.
x Two labels must be placed on each shelf and lower panel (as shown below).
x If labels are NOT properly attached, contact Structural Concepts. See SCC TECHNICAL SERVICE
CONTACT INFORMATION section in this manual for contact information.

Related product manuals