Introduction
2
INTRODUCTION
This manual is designed to assist you with the operation of the Modular Patient System (MPS) 3000 Bed.
Read it thoroughly before using the equipment. There is a separate maintenance manual for the 3000 bed
that contains information on preventative maintenance, troubleshooting, repair procedures, parts lists, etc.
SPECIFICATIONS
Maximum Weight Capacity 500 pounds
Overall Bed Length/Width 93”/41–1/2”
Patient Sleep Surface 84”/35”
Minimum/Maximum Bed Height 15 3/8”/31”
Knee Gatch Angle 0_ to 40_
Fowler Angle 0_ to 60_
Trendelenberg/Reverse Trendelenberg –12_ to +12 _
Weigh System Accuracy (optional equipment) + / – 1% of total patient weight
Electrical Requirements – all electrical requirements
meet UL 544 specifications.
110 VAC, 60 Hz, 10.0 Amp
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make important instructions clearer.
To Next Page
Loading...
