Stryker 3000 - Weigh System Control Panel Guide (Optional Equipment)

Weigh System Control Panel Guide
18
SYMBOL ACTION DISPLAY
To prepare bed for new patient:
Press and release ”SCALE ON””WEIGHING...”
to activate the scale system, begin ”XXX.X LB”
a new function and to display patient
weight.
Press and hold ”ZERO””HOLD TO ZERO WT.”
”RELEASE TO ZERO”
Release ”ZERO””DO NOT TOUCH BED”
”0.0 LB”
To add or remove equipment
during patient stay without
affecting registered patient
weight:
Press and release ”SCALE ON””WEIGHING...”
”XXX.X LB”
Press ”HOLD TO START”
”RELEASE TO START”
Release ”DO NOT TOUCH BED”
”ADD/REMOVE EQUIP.”
Add or remove equipment.
Press ”RELEASE TO FIN.”
Release ”DO NOT TOUCH BED”
”XXX.X LB”
To convert the patient’s weight:
To convert the patient’s weight ”WEIGHT NOW KGS”
to kilograms, press and release ”XXX.X KG”
”LBS./KG.”
Repeat the procedure to return to
pounds.
SCALE
ON
ZERO
LBS.
KG.