Why does the head section (Fowler) of my Stryker 3000 drift down when weight is added?
If the head section (Fowler) drifts down when weight is added, it indicates that the back drive clutch has failed. Replace the motor and clutch assembly to resolve this issue.
General| Brand | Stryker |
|---|---|
| Model | 3000 |
| Category | Medical Equipment |
| Language | English |
Provides critical safety information, definitions, and precautions for operating and servicing the bed.
Presents a biannual checklist for performing essential preventative maintenance tasks on the bed.
Guides users through the essential steps to ensure the bed is properly set up and functional before use.
Details the operation of various litter functions, including CPR release, Foley bag hooks, and I.V. poles.
Covers the operation of optional features on the foot and head boards, such as chart racks and CPR boards.
Details the usage and calibration of the optional weigh system for patient weight monitoring.
Addresses common mechanical problems with the bed and provides potential solutions and reference pages.
Focuses on troubleshooting issues related to the motion interrupt system and its switches.
Addresses issues where the bed's motion functions (raise/lower) are not working correctly.
Details troubleshooting steps for the knee section's electrical and mechanical raise/lower functions.
Provides troubleshooting steps for the head section's electrical and mechanical raise/lower functions.
Covers troubleshooting for nurse call system issues, including LED indicators and activation problems.
Addresses troubleshooting for the bed exit system, including activation, alarms, and disarming issues.
Covers troubleshooting for the weigh system, including display issues, accuracy, and function problems.
Details troubleshooting for the dynamic mattress system, including operation, air loss, and adjustment issues.
Outlines diagnostic procedures and repairs for the optional weigh system, including calibration.
Provides detailed wiring diagrams showing cable routing and connections for the fully loaded bed.
Lists component part numbers, voltages, and measurement points for electrical troubleshooting.
To Next Page
