Chapter One – Introduction
9
This manual is designed to assist you with the maintenance of the Modular Patient System (MPS) 3000 Bed.
Read it thoroughly before using the equipment. Keep the manual for future reference.
1.1 BED SPECIFICATIONS
Maximum Weight Capacity 500 pounds
Overall Bed Length/Width 93” / 41–1/2”
Patient Sleep Surface 84” / 35”
Minimum/Maximum Bed Height 15 3/8” / 31”
Knee Gatch Angle 0 to 40
Fowler Angle 0 to 60
Trendelenberg/Reverse Trendelenberg –12 to +12
Weigh System Accuracy (optional equipment) + / – 1% of total patient weight
Electrical Requirements – all electrical requirements
meet UL 544 specifications.
110 VAC, 60 Hz, 10.0 Amp
1.2 SAFETY
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make important instructions clearer.