Stryker 3000 - Gatch Drive Assembly

Appendix A – Assembly Drawings and Parts Lists
159
A.2 LITTER DRAWINGS (CONTINUED)
GATCH DRIVE ASSEMBLY P/N 3000–300–400 (CONTINUED)
Item Part No. Part Name Qty.
A3–207 Hex Hd. Cap Screw 2
B52–720 Nylon Flat Washer 2
C 3000–300–417 Gatch Motor Bracket 1
D *3000–300–410 Gatch Motor Ass’y1
E21–139 Socket Set Screw 1
F 3000–300–425 Drive Motor Coupling 1
G 3000–300–455 CPR Isolation Bushing 3
H *3000–300–412 Screw Drive Coupling 1
J26–196 Groove Pin 2
K 3000–300–1 Litter Pivot Bushing 2
L11–2 Flat Washer 2
M3–129 Hex Hd. Cap Screw 1
N 3000–300–424 Hitch Pin 1
P 3000–300–420 Link Bushing 1
Q 3000–300–421 Gatch Link 1
R 3000–300–419 Gatch Nut 1
S 3000–300–418 Gatch Nut Sleeve 1
T 3000–300–428 Gatch Link Sleeve 1
U 3000–300–423 Link Wire 1
V16–16 Nylock Nut 1
W **3000–300–401 Capacitor 1
X 3000–300–402 Double–Sided Tape 1
Y11–333 Flat Washer 1
Z 3000–300–415 Gatch Screw Bushing 2
AA 23–106 Hex Washer Hd. Screw 2
AB (page 162) Limit Switch Assembly 1
AC 52–283 Plastic Clip Nut 2
AD *3000–300–411 Gatch Screw 1
AE 3–126 Hex Washer Hd. Screw 2
AF 3000–200–228 Mtr. Mtg. Plate Grommet 2
AG 3000–300–405 Gatch Brkt. Weldment 1
AJ 3000–300–113 Cable Tie (not shown) 2
AK 11–339 Shim Washer 1
AL 23–82 Hex Washer Hd. Screw 1
AM 3000–300–429 Steel Stop Tube 1
AN 13–18 Ext. Tooth Lock Washer 1
AP 11–3 Flat Washer 2
AQ 52–718 Molded Nylon Insulator 2
AR 11–359 Flat Washer 2
AS 7900–1–291 Flame Retardant Foam Tape 1
AT 11–302 Flat Washer 1
* See page 14 for replacement kit part number.
** See page 15 for replacement kit part number.