Stryker 3000 - Siderail Assembly Removal

Chapter Six – Maintenance Procedures – Siderails
123
6.1 HEAD AND FOOT END SIDERAIL (CONTINUED)
SIDERAIL ASSEMBLY REMOVAL
(RIGHT FOOT END SIDERAIL KIT P/N 3000–400–701, LEFT FOOT END SIDERAIL KIT P/N
3000–400–703, RIGHT HEAD END SIDERAIL KIT P/N 3000–400–705, LEFT HEAD END SIDE-
RAIL KIT P/N 3000–400–707)
Required Tools:
#3 Phillips Screwdriver
A
Removal Procedure:
1. Run the head section up electrically when removing a head end siderail.
2. Unplug the bed power cord from the wall socket.
3. Lower the siderail being removed.
4. If removing a head end siderail, disconnect the siderail cable (A) from under the head section (shown in
the illustration).