Chapter Six – Maintenance Procedures – Siderails
124
6.1 HEAD AND FOOT END SIDERAIL (CONTINUED)
SIDERAIL ASSEMBLY REMOVAL (CONTINUED)
B
C
5. Using a Phillips screwdriver, remove the two screws (B) or (C) holding the siderail assembly on the head
or foot section.
6. Push in on the siderail assembly to clear under the head or foot section and pull the siderail back to remove
it from the bed.
7. Reverse the above steps to reinstall the siderail assembly.
NOTE
Grease the glide rods on the replacement siderail assembly with Syntech grease.
To Next Page
Loading...
