Stryker 3000 - LED Display Panel Guide

Chapter Two – MPS Operations
27
2.5 FOOT BOARD/HEAD BOARD OPERATION GUIDE (CONTINUED)
LED DISPLAY PANEL GUIDE
The LED Display Panel is located at the foot end of the bed, under the Control Panel.
POWER BED MOTION LOCKED BRAKE NOT SET BED EXIT ON AIR LOSS
”POWER” – will light when the bed is plugged into the wall receptacle.
”BED MOTION LOCKED” – will light when the Bed Motion Lock has been activated.
”BRAKE NOT SET” – will blink when the brakes have not been set.
”BED EXIT ON” – will light when the Bed Exit function has been activated (optional equipment).
”AIR LOSS” – will light when there is a possible air leak in the Dynamic Mattress System (optional equipment).