Chapter Two – MPS Operations
26
2.5 FOOT BOARD/HEAD BOARD OPERATION GUIDE (CONTINUED)
FOOT BOARD CONTROL PANEL GUIDE (Continued)
1. Push to turn the Dynamic Mattress system on or off (see page 35).
2. Push to activate automatic or manual modes (see page 35).
This panel is optional equipment.
1. LCD – displays patient weight.
2. Push to zero bed (see page 31 & 33).
3. Push when changing equipment on the bed (see page 31 & 33).
4. Push to change weight from pounds to kilograms or back (see page 32 & 33).
5. Push to turn weigh system on (see page 31 – 33).
6. Push to decrease numerical value of displayed weight (see page 32 & 34).
7. Push to increase numerical value of displayed weight (see page 32 & 34).
This panel is optional equipment.
NOTE
See page 27 for explanation of LED’s.
ON
OFF
1
AUTO
MAN
2
1
23 4
567
SCALE
ON